Author Topic: Fox needs help!  (Read 1752 times)

0 Members and 1 Guest are viewing this topic.

Offline Ostits

  • TMS Crew
  • *
  • Posts: 1921
    • View Profile
Fox needs help!
« on: May 18, 2007, 12:26:02 PM »
Quote
Fox / FoxBot säger:
i was installing a new forceware from nvidia at around 19:00 (its 21:00) now
Fox / FoxBot säger:
well i cant say for sure if its been a real nvidia one, i got it off codeguru3d (trustable source), and i have seen tons of that version on google (i checked to make sure its not a fake)

though, it wasnt listed on nvidia.com - it wasnt even in the beta driver directory
Fox / FoxBot säger:
however: i installed it and the installation went fine
Fox / FoxBot säger:
at the end, it prompted me to reboot
Fox / FoxBot säger:
i just closed everything and rebooted
Fox / FoxBot säger:
now after rebooting, i get errors.

1. [German: Ordnungzahl] 24 was not found in ODCB32.dll (Window title:  winlogon.exe - ...)

2. Failure of User interface
The dll msgina.dll required for the logon wasnt loaded, please contact your system administrator or restore the file
Fox / FoxBot säger:
i went to the other pc - this one - (it has almost no graphics, and only keyboard support) and googled.
Fox / FoxBot säger:
i found some article in the microsoft support database.
Fox / FoxBot säger:
but the stupid cockheads at microsoft only give 2 advice:
Fox / FoxBot säger:
1. Fix your system
^ yes thats all
Fox / FoxBot säger:
2. Hit F8 while your PC is booting and select "Run with last working setup"
^ I tried that before and it just gives the same result as normal boot
Fox / FoxBot säger:
it also said the problem is caused by security update KB834283 (might be 832483) which doesnt have needed access to the temp dir
Fox / FoxBot säger:
what i tried now is to put in the windows cd and used recovery
Fox / FoxBot säger:
but that didnt work cause i need a floppy disk/drive - i dont have one
Fox / FoxBot säger:
so i rebooted and tried the manual command line support
Fox / FoxBot säger:
i can logon fine and navigate through most dirs
Fox / FoxBot säger:
i checked my WindowsUpdate.log but it has nothing in it at 19:00 so i think the ms database is WRONG! (now, that proofed my guess: you guys at ms suck..)
Fox / FoxBot säger:
ok then i checked system32, msgina.dll - exists (last changed 2004)
shlwapi.dll - "
odcb32.dll - "
winlogon.exe - "
Fox / FoxBot säger:
i also looked at boot.ini, win.ini, autorun.ini, autoexec.bat etc
Fox / FoxBot säger:
but i couldnt find ANYTHING
Fox / FoxBot säger:
however, when the error appears, i still have network access using this pc
Fox / FoxBot säger:
BUT i cant acces c$, x$ or d$ - "uploads" shared directory works fine, scanning files works and printing works
Fox / FoxBot säger:
the forceware / driver from nvidia was versoin 160.sumat i think. its been one which said ti supports the nVidia6800GS/XT - it might be faked..
Fox / FoxBot säger:
so please. post this on forums where someone might know the answer and call me asap
Fox / FoxBot säger:
i tried to plug the hdd to other pc's but i linked it to the mobo so it wont unlock

Please help the guy out, Im no technical genius, would anyone know whats happening?

Offline Mickey!

  • Posts: 977
    • View Profile
Fox needs help!
« Reply #1 on: May 18, 2007, 12:41:46 PM »
http://www.ubcd4win.com/

boot that cd

use the disc tools to check what went wrong

use the restore tools to get back what went


Offline JayFoxRox

  • Posts: 2221
    • View Profile
    • Homepage
Fox needs help!
« Reply #2 on: May 18, 2007, 12:59:19 PM »
(Using PSP for internet, xbox usb keyboard for typing)

ironicly i needed that cd a few days ago and burned it. BUT since my CD recorder has no drivers, all cd's i burn have only one file which is exactly 128 bytes: "#ERROR" rest is padding...

i cant burn it now anyways cause the pc with the burner is fucked, so either i have to wait till my brother comes back or my dad is able to boot our old pc in less than 4 hours - yes.. sometimes it boots for 4 hours.. ill try it anyways now

Offline Mickey!

  • Posts: 977
    • View Profile
Fox needs help!
« Reply #3 on: May 18, 2007, 01:00:59 PM »
=/  go round to a mates houce burn the cd ?

or a relatives or just break into somebody's house

Offline KillaMarci

  • <3
  • Veteran Member
  • Posts: 8700
  • Don't you remember the monsters?
    • View Profile
Fox needs help!
« Reply #4 on: May 18, 2007, 03:00:23 PM »
Something simmilar happened to me , too with thoose Guru3D Drivers  I couldnt fix it

Offline JayFoxRox

  • Posts: 2221
    • View Profile
    • Homepage
Fox needs help!
« Reply #5 on: May 19, 2007, 04:31:53 AM »
F...F...F...

FIXED!


*jumps around*

Offline Brainkiller

  • Narkissos
  • Veteran Member
  • Posts: 8107
  • Twisted Metal Stunters
    • View Profile
Fox needs help!
« Reply #6 on: May 19, 2007, 04:46:18 AM »
Well done, care to explain how you fixed it so if other people come across a similar problem they'll know what to do?
« Last Edit: May 19, 2007, 04:46:36 AM by Brainkiller »

Offline Mickey!

  • Posts: 977
    • View Profile
Fox needs help!
« Reply #7 on: May 19, 2007, 05:18:29 AM »
He explained to me on msn

Quote
(12:02 PM) Fox / FoxBot:   however - fix:
first, boot in knoppix or another tool so you have network access
(12:02 PM) Fox / FoxBot:   then rename system32 to something else
(12:02 PM) Fox / FoxBot:   reboot windows
(12:02 PM) Fox / FoxBot:   it will say: recovering
(12:02 PM) Fox / FoxBot:   when you reboot youll find a new system32 with only 500 files or sumfin
(12:03 PM) Fox / FoxBot:   (i had around 5000 before)
(12:03 PM) Fox / FoxBot:   ok now copy the system32 from another system and DONT replace files
(12:03 PM) Fox / FoxBot:   that will keep the files assigned to your hardware (created by winxp) but add additional dll's from SP2 (other machine needs same SP btw)
(12:04 PM) Fox / FoxBot:   ok, almost done..
(12:04 PM) Fox / FoxBot:   now just set a restore point using Restore Wizard (Homebrew
(12:04 PM) Fox / FoxBot:   after that, just reboot and youll see that windows almost boots again
(12:04 PM) Fox / FoxBot:   it will tell you: Finishing Security update: creating msgina.dll; winlogon.exe; ..
(12:04 PM) Fox / FoxBot:   and then it will fail, reboot
(12:05 PM) Fox / FoxBot:   just boot to UBCD again and recopy the winlogon.exe; msgina.dll and odcb32.dll from the other system again
(12:05 PM) Fox / FoxBot:   In the explorer the old files are shown with a normal size like 600KB - BUT when you want to replace it says Replace File **** Size 0KB with **** Size 600KB
(12:06 PM) Fox / FoxBot:   which means the files dont exist when the update comes together with driver updates
(12:06 PM) Fox / FoxBot:   and after reboot it should work

« Last Edit: May 19, 2007, 05:19:12 AM by Mickey! »

Offline Neo Anderson

  • ATS precision whore
  • Veteran Member
  • Posts: 5079
  • Registered on: April 16, 2004
    • View Profile
Fox needs help!
« Reply #8 on: May 19, 2007, 12:22:19 PM »
Got no clue why the fuck anyone would download an nvidia driver from anywhere but the nvidia website.  

Offline JayFoxRox

  • Posts: 2221
    • View Profile
    • Homepage
Fox needs help!
« Reply #9 on: May 19, 2007, 04:25:31 PM »
Cause nvidia links to that page on the developer portal

developer.nvidia.com

but it doesnt link to any special drivers, it only says: "Check there for drivers over FW 50.0 with debug shader support"
Thats the only bad thing i can find about nvidia, they suck at coding, have bad support for older cards and they dont say what to do exactly - they do ALOT of good stuff for developers anyway

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal